Chemical cleaning m
In silicone rubber extruder machinery industry, its mechanical equipment is very much, and ...
The extrusion moldi
Silicone extruder is tire production process is necessary and required rubber machinery equ...
Silica gel extruder
In the rubber machinery industry, the silicon extruder is a more common and more commonly u...
Use of extruder hea
CONDAT forging lubricants with unique ingredients designed to help create companies in chal...
The plastic extruder's main machine is the extruder, which consists of the extruding system, transmission system and heating cooling system.
Plastic extruding machines are commonly referred to as mainframes in plastic extruding machines, and the plastic extruding machines are called auxiliary machines.
After more than 100 years of development, the plastic extruder has been derived from the original single screw with double screw, multiple screw and even no screw.
Plastic extruder (host) and pipes, films, with material, monofilament, flat wire, packing tape, squeeze net, plate (sheet material), special-shaped material, granulation, such as cable coated all kinds of plastic molding auxiliary machinery, all kinds of plastic extrusion molding production lines, production of various plastic products.
As a result, plastic extruding machines are one of the most widely used machines in the plastic processing industry, both present and future.
65x25 plastic extruder track machine with traction machine
Screw speed 10-65r/min rate of gravity 500kg line of thread or light rod
The drive power 30kw rate leads to the 6-90m/min row axis 50mm diameter
Temperature control segment (fuselage/engine head) 4/3 motor power 5.5 kw motor power 4kg. M
Fuselage heating power 1 6kw bandwidth 80mm Max. 80m/mi n
The maximum extrude of 130kg/h is the maximum weight of 60mm
90x25 plastic extruder track rate drawing machine
Screw diameter/length-diameter ratio 90mm / 25:1 rate guide pn1250-1600mm
Screw speed 10 to 60r/min rate of force 800kg line of silk
The drive power 55kw rate leads to the 6-80m/min line shaft with a diameter of 60mm
Temperature control segment (fuselage/engine head) 5/3 motor power 6kg. M
The fuselage heat power 25kw bandwidth 100mm maximum receiving line speed 60m/min
The maximum extrude 280kg/h leads to the maximum weight of the 8080mm with 12T
150 x25 plastic extruder track machine with traction machine
Screw diameter/length-diameter ratio 150mm / 25:1 rate guide pn160-3150mm
Screw speed 10-60r/min traction 2500kg line of thread
The drive power 185kw rate leads to the 6-50m/min row shaft diameter 75mm
Temperature control segment (fuselage/engine head) 6/3 motor power 1 5kw motor power 8kg. M
The fuselage heat power 60kw bandwidth 160mm maximum line speed 50 m/m I n
Maximum extrude 750kg/h traction maximum diameter ct) 160mm maximum weight 15T
